Let’s Get Your Equipment Set Up
We are going to be getting into the fun stuff very soon. Before though, you need to know a little about your equipment.
Thankfully, setting up and using our Pro Equipment is nice and easy.
Here is the written content of what is covered in the video that is up next.
- UNFASTEN SOLUTION CUP
To unfasten solution cup simply rotate cup Clockwise.
- FILLING SOLUTION CUP
Fill solution cup approximately ¾ full with SunFX Pro Premium Tanning Solution. Wipe any excess solution from (1) inside of the applicator body and (2) outside of the solution cup.
CAUTION: Filling the cup beyond this recommended level may cause spillage when returning the cup to the spray applicator. Excess solution may also be spilled or splashed onto the inside of the applicator causing it to drip down during spraying.
- FASTEN SOLUTION CUP BACK ON TO APPLICATOR
To fasten applicator cup back onto applicator rotate counter-clockwise until reasonably tight.
CAUTION: If any leaking occurs simply tighten cup further.
- ATTACHING HOSE TO APPLICATOR
Line up the locating groove in the hose with the tab inside the applicator handle. Turn counter-clockwise and GENTLY lock end of the hose securely into the handle of the applicator.
CAUTION: Excessive force may result in the bending or breaking of these parts.
- ATTACHING HOSE TO TURBINE
The hose has 2 small tabs on the end. Position these correctly with the slots in the base of the turbine and then GENTLY turn counter-clockwise to lock the hose into the unit.
CAUTION: Excessive force may result in damage to these parts.
- PLUG IN POWER CORD FIRMLY
The power cord into the slot on the base of the turbine or Mini and plug into power socket on the wall.
You are now ready to use your system
- TURN SYSTEM ON TO START SPRAYING
The power switch is located conveniently underneath the top of the Pro Tower system or on the side of the Pro Mini system.
Next up is using the applicator